Our consoles will fit up to 3 swell shoes. Generally, people get the same number of shoes as their sample set(s). However, remember that these shoes can be used for different things in different sample sets. So, it could be a crescendo shoe in one and a swell shoe in the other.
Finally, a MIDI pedalboard designed by organists for organists! This MIDI pedalboard has been designed to the exact spec...
Price: USD2,095.00
Quantity:
Classic AGO MIDI Pedalboard
Finally, a MIDI pedalboard designed by organists for organists! This MIDI pedalboard has been designed to the exact specifications of the American Guild of Organists. It also happens to be perfect for a Hauptwerk setup. Organists can gain the experience of playing on a performance pedalboard in the privacy of their home.
Features
* Engineered to the exacting specifications of the American Guild of Organists for a 32-note pedalboard. * Concave and radiating. * Selectable output MIDI channel (1-16). * ‘MIDI merge’ function for convenient connection of multiple MIDI devices. * Octave transpose function (one up and back to default). * Diagnostic LED. * Heel and Toe springs for ‘best feel’. * Equipped with magnetic reed switches. * Includes MKSC-4 (MIDI Keyboard Scan Computer) board. * Fully assembled and ready to be connected to MIDI devices. * Will accept SSM-2 Swell Shoe Assemblies * Measures 53 ½" (135.9cm) [front/toe width] x 37 ½" (95.25cm) [back/heel width] x 37" (94 cm) [deep]. The middle 'E' key is 5" above ground level. * Weight: 84 lbs bare, 100 lbs packaged
Finally, a MIDI pedalboard designed by organists for organists! This MIDI pedalboard has been designed to the exact spec...
Price: USD2,095.00
Quantity:
AGO MIDI Pedalboard (Unfinished)
Finally, a MIDI pedalboard designed by organists for organists! This MIDI pedalboard has been designed to the exact specifications of the American Guild of Organists. It also happens to be perfect for a Hauptwerk setup. Organists can gain the experience of playing on a performance pedalboard in the privacy of their home. Limited supply.
UNFINISHED VERSION (PEDAL BOARD NOT PAINTED)
Features
* Engineered to the exacting specifications of the American Guild of Organists for a 32-note pedalboard. * Concave and radiating. * Selectable output MIDI channel (1-16). * ‘MIDI merge’ function for convenient connection of multiple MIDI devices. * Octave transpose function (one up and back to default). * Diagnostic LED. * Heel and Toe springs for ‘best feel’. * Equipped with magnetic reed switches. * Includes MKSC-4 (MIDI Keyboard Scan Computer) board. * Fully assembled and ready to be connected to MIDI devices. * Will accept SSM-2 Swell Shoe Assemblies * Measures 53 ½" (135.9cm) [front/toe width] x 37 ½" (95.25cm) [back/heel width] x 37" (94 cm) [deep]. The middle 'E' key is 5" above ground level. * Weight: 84 lbs bare, 100 lbs packaged
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescend...
Price: USD250.00
Quantity:
Swell Shoe for MIDI pedalboard - Wood
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescendo pedal that look and feel just like those on a good pipe-organ console. Up to three shoes can be installed on the Classic MIDI Pedalboard. For use as a crescendo pedal, the shoe can be optionally mounted 3/8" higher than the other shoes.
For strength and rigidity, the mounting brackets are made of 0.125" steel and clamp directly onto the Classic MIDI Pedalboard. The foot-rest is wood and finished in red walnut, and the mounting brackets are painted black.
A rack-and-pinion gear drives a potentiometer (variable resistor) that is connected to the Classic MIDI Keyboard or the MKSC-4A MIDI keyscan computer located inside the Classic MIDI pedalboard. Operating the shoe causes voltage changes which the MKSC-4A detects and converts to corresponding MIDI volume-controller messages.
Features
Engineered to the exacting specifications of the American Guild of Organists.
Mounts onto the Classic MIDI Pedalboard (sold separately).
Connects to the Classic MIDI Keyboard or the Classic MIDI Pedalboard to produce MIDI messages.
Beautiful wood finished in red walnut.
Clamps onto the back of the pedalboard so is easily adjustable.
Mounting bracket made of 0.125" thick steel to withstand heavy pressure from the feet.
Optional positions available to mount the shoe 3/8" higher when used as a Crescendo pedal.
Adjustable friction setting.
Pedal measures 11.5" x 4" and is mounted 1.25” above and 0.75" away from the sharp cap in the rest position (AGO Standard).
Up to three shoes can be installed and configured for Swell, Expression and Crescendo pedals.
Rack and gear to drive a rotary potentiometer.
Requires no external power. Power is derived from the Classic MIDI Keyboard or Pedalboard.
Some assembly required. Mounting hardware and cables are included.
Applications
Unlike typical MIDI volume pedals, the Classic Swell Shoe is like swell shoes found on church organs. As such, it is ideal for home or practice use. When connected to the Classic MIDI Keyboard or the MKSC-4A controller in a Pedalboard, the swell shoe can be used to adjust volume levels on MIDI sound modules conforming to the MIDI standards of the MIDI Manufacturers Association. This includes MIDI sound modules from Ahlborn Galanti and PC-based synthesizer software such as Hauptwerk. With the addition of MIDI keyboards (ideally the Classic MIDI Keyboards), a low-cost, high-quality home organ console can be constructed with most of the features of more expensive pipe and electronic organs.
Compatibility Notes
This swell-shoe is designed for newer Classic MIDI pedalboards equipped with the MKSC-4a keyscan computer. If you purchased a Classic MIDI pedalboard before June 1, 2004 and would like to attach our swell-shoe, please contact us for further details.
The clamp in this swell-shoe kit is designed to fit perfectly on the front of a Classic MIDI pedalboard. Since that part of pedalboards is not standard, it is quite likely this clamp will not fit very well on other pedalboards.
Our MIDIWorks MIDI pedalboard can connect a maximum of 3 swell shoes.
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescend...
Price: USD195.00
Quantity:
Swell Shoe no Pedalboard mounting bracket - Wood
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescendo pedal that look and feel just like those on a good pipe-organ console.
A rack-and-pinion gear drives a potentiometer (variable resistor) that is connected to the Classic MIDI Keyboard or the MKSC-4A MIDI keyscan computer located inside the Classic MIDI pedalboard. Operating the shoe causes voltage changes which the MKSC-4A detects and converts to corresponding MIDI volume-controller messages.
Features
Engineered to the exacting specifications of the American Guild of Organists.
1 3/4" bracket for mounting inside a traditional console.
Connects to the Classic MIDI Keyboard, Pedalboard switch kit or the Classic MIDI Pedalboard to produce MIDI messages.
Beautiful wood finished in red walnut.
Adjustable friction setting.
Rack and gear to drive a rotary potentiometer.
Requires no external power. Power is derived from the Classic MIDI Keyboard or MKSC 4a Pedalboard scanner board.
Applications
Unlike typical MIDI volume pedals, the Classic Swell Shoe is like swell shoes found on church organs. As such, it is ideal for home or practice use. When connected to the Classic MIDI Keyboard or the MKSC-4A controller in a Pedalboard, the swell shoe can be used to adjust volume levels on MIDI sound modules conforming to the MIDI standards of the MIDI Manufacturers Association. This includes MIDI sound modules from Ahlborn Galanti and PC-based synthesizer software such as Hauptwerk. With the addition of MIDI keyboards (ideally the Classic MIDI Keyboards), a low-cost, high-quality home organ console can be constructed with most of the features of more expensive pipe and electronic organs.
Compatibility Notes
This swell-shoe is designed for newer Classic MIDI pedalboards equipped with the MKSC-4a keyscan computer. If you purchased a Classic MIDI pedalboard before June 1, 2004 and would like to attach our swell-shoe, please contact us for further details.
There is no clamp for a MIDIWorks pedalboard in this swell-shoe kit. This shoe is for mounting inside a console on a regular 1 3/4" thick mounting rail.
Our MIDIWorks MIDI pedalboard can connect a maximum of 3 swell shoes.
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescend...
Price: USD250.00
Quantity:
Swell Shoe for MIDI pedalboard - Black Rim
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescendo pedal that look and feel just like those on a good pipe-organ console. Up to three shoes can be installed on the Classic MIDI Pedalboard. For use as a crescendo pedal, the shoe can be optionally mounted 3/8" higher than the other shoes.
For strength and rigidity, the mounting brackets are made of 0.125" steel and clamp directly onto the Classic MIDI Pedalboard. The foot-rest is finished in black with a layer of protective rubber, and the mounting brackets are painted black.
A rack-and-pinion gear drives a potentiometer (variable resistor) that is connected to the Classic MIDI Keyboard or the MKSC-4A MIDI keyscan computer located inside the Classic MIDI pedalboard. Operating the shoe causes voltage changes which the MKSC-4A detects and converts to corresponding MIDI volume-controller messages.
Features
Engineered to the exacting specifications of the American Guild of Organists.
Mounts onto the Classic MIDI Pedalboard (sold separately).
Connects to the Classic MIDI Keyboard or the Classic MIDI Pedalboard to produce MIDI messages.
Beautiful black finish.
Protective rubber pad provides traction and reduces slippage.
Clamps onto the back of the pedalboard so is easily adjustable.
Mounting bracket made of 0.125" thick steel to withstand heavy pressure from the feet.
Optional positions available to mount the shoe 3/8" higher when used as a Crescendo pedal.
Adjustable friction setting.
Pedal measures 11.5" x 4" and is mounted 1.25” above and 0.75" away from the sharp cap in the rest position (AGO Standard).
Up to three shoes can be installed and configured for Swell, Expression and Crescendo pedals.
Rack and gear to drive a rotary potentiometer.
Requires no external power. Power is derived from the Classic MIDI Keyboard or Pedalboard.
Some assembly required. Mounting hardware and cables are included.
Applications
Unlike typical MIDI volume pedals, the Classic Swell Shoe is like swell shoes found on church organs. As such, it is ideal for home or practice use. When connected to the Classic MIDI Keyboard or the MKSC-4A controller in a Pedalboard, the swell shoe can be used to adjust volume levels on MIDI sound modules conforming to the MIDI standards of the MIDI Manufacturers Association. This includes MIDI sound modules from Ahlborn Galanti and PC-based synthesizer software such as Hauptwerk. With the addition of MIDI keyboards (ideally the Classic MIDI Keyboards), a low-cost, high-quality home organ console can be constructed with most of the features of more expensive pipe and electronic organs.
Compatibility Notes
This swell-shoe is designed for newer Classic MIDI pedalboards equipped with the MKSC-4a keyscan computer. If you purchased a Classic MIDI pedalboard before June 1, 2004 and would like to attach our swell-shoe, please contact us for further details.
The clamp in this swell-shoe kit is designed to fit perfectly on the front of a Classic MIDI pedalboard. Since that part of pedalboards is not standard, it is quite likely this clamp will not fit very well on other pedalboards.
Our MIDIWorks MIDI pedalboard can connect a maximum of 3 swell shoes.
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescend...
Price: USD195.00
Quantity:
Swell Shoe no Pedalboard mounting bracket - Black Rim
With a Classic Swell Shoe kit (SSM-001), a Classic MIDI pedalboard can be equipped with expression pedals and a crescendo pedal that look and feel just like those on a good pipe-organ console.
A rack-and-pinion gear drives a potentiometer (variable resistor) that is connected to the Classic MIDI Keyboard or the MKSC-4A MIDI keyscan computer located inside the Classic MIDI pedalboard. Operating the shoe causes voltage changes which the MKSC-4A detects and converts to corresponding MIDI volume-controller messages.
Features
Engineered to the exacting specifications of the American Guild of Organists.
1 3/4" bracket for mounting inside a traditional console.
Connects to the Classic MIDI Keyboard, Pedalboard switch kit or the Classic MIDI Pedalboard to produce MIDI messages.
Beautiful black finish.
Protective rubber pad provides traction and reduces slippage.
Adjustable friction setting.
Rack and gear to drive a rotary potentiometer.
Requires no external power. Power is derived from the Classic MIDI Keyboard or MKSC 4a Pedalboard scanner board.
Applications
Unlike typical MIDI volume pedals, the Classic Swell Shoe is like swell shoes found on church organs. As such, it is ideal for home or practice use. When connected to the Classic MIDI Keyboard or the MKSC-4A controller in a Pedalboard, the swell shoe can be used to adjust volume levels on MIDI sound modules conforming to the MIDI standards of the MIDI Manufacturers Association. This includes MIDI sound modules from Ahlborn Galanti and PC-based synthesizer software such as Hauptwerk. With the addition of MIDI keyboards (ideally the Classic MIDI Keyboards), a low-cost, high-quality home organ console can be constructed with most of the features of more expensive pipe and electronic organs.
Compatibility Notes
This swell-shoe is designed for newer Classic MIDI pedalboards equipped with the MKSC-4a keyscan computer. If you purchased a Classic MIDI pedalboard before June 1, 2004 and would like to attach our swell-shoe, please contact us for further details.
There is no clamp for a MIDIWorks pedalboard in this swell-shoe kit. This shoe is for mounting inside a console on a regular 1 3/4" mounting rail.
Our MIDIWorks MIDI pedalboard can connect a maximum of 3 swell shoes.
Description
The bench is finished with a walnut-stained wood-veneer to match our popular MIDI pedalboard. The bench is ...
Price: USD650.00
Bench Classic Studio Organ Kit / walnut
Description
The bench is finished with a walnut-stained wood-veneer to match our popular MIDI pedalboard. The bench is sufficiently wide to accommodate AGO standard pedalboards.
To reduce shipping costs, the unit is flat packed and requires assembly. A Phillips screw driver and hammer are all that is required.
Applications
The Studio Organ Bench is intended for light duty home and hobby use.
Features
Walnut-stained wood-veneer to match our popular MIDI Pedalboard
Joints reinforced with metal brackets.
Hinged lid for storage.
Sufficient clearance (46.5") between legs to accommodate AGO standard pedalboards
This bench comes already assembled with a benchtop that can be raised 2" higher than standard height, or dropp...
Price: USD2,495.00
Adjustable Organ Bench (Solid Maple, Custom Finish)
This bench comes already assembled with a benchtop that can be raised 2" higher than standard height, or dropped 1" lower. It comes with a foot rest, but no music compartment. An optional backrest can also be installed. Please contact us in regards to the specific finish you would prefer (picture displays unfinished bench).
Made in the USA.
For custom colors please contact us.
Adjusts 24" to 27" H, bench top 14" D x49-1/2" L, 45" between legs.
Custom finishes will take around 90 days to ship. Color sample will need to be provided by the customer.
Solid Maple organ bench (unfished displayed in picture) complete with a built-in music compartment and foot rest. Comes ...
Price: USD1,395.00
Bench (Solid Maple. Custom Finish)
Solid Maple organ bench (unfished displayed in picture) complete with a built-in music compartment and foot rest. Comes assembled. Can also be fitted with adjusting blocks to increase height. Please contact us in regards to the specific finish you would prefer.
Made in the USA.
Please contact us to inquire about custom colors.
25" H, bench top 14" D x 49-1/2" L, 45" between feet.
Custom finishes will take around 90 days to ship. Color sample will need to be provided by the customer.
Solid Maple organ bench with a red walnut finish (unfinished displayed in picture) complete with a built-in music compar...
Price: USD1,095.00
Bench (Solid Maple. Red Walnut Finish)
Solid Maple organ bench with a red walnut finish (unfinished displayed in picture) complete with a built-in music compartment and foot rest. Comes assembled. Can also be fitted with adjusting blocks to increase height.
Made in the USA.
Please contact us to inquire about custom colors.
25" H, bench top 14" D x 49-1/2" L, 45" between feet.
This bench comes already assembled with a benchtop that can be raised 2" higher than standard height, or dropp...
Price: USD2,395.00
Adjustable Organ Bench (Solid Maple, Walnut Finish)
This bench comes already assembled with a benchtop that can be raised 2" higher than standard height, or dropped 1" lower. It comes with a foot rest, but no music compartment. An optional backrest can also be installed. Comes with a Red Walnut finish (picture displays unfinished bench).
Made in the USA.
For custom colors please contact us.
Adjusts 24" to 27" H, bench top 14" D x49-1/2" L, 45" between legs.
The backrest is designed for our Adjustable Benches. Adds 5" to depth, 15-1/4" to height. Backrest has a 4" mounting sur...
Price: USD350.00
Bench Back Rest (Solid Maple, Red Walnut Finish)
The backrest is designed for our Adjustable Benches. Adds 5" to depth, 15-1/4" to height. Backrest has a 4" mounting surface and mounts 1/2" below bottom of bench top on 33" centers. Mounting hardware provided. Made from solid Maple, Red Walnut Finish.
Solid Birch organ bench with a red walnut finish (unfinished displayed in picture) complete with a built-in music c...
Price: USD2,350.00
Bench (Solid Maple. Red Walnut Finish) Gate Leg Style
Solid Birch organ bench with a red walnut finish (unfinished displayed in picture) complete with a built-in music compartment and foot rest. Comes assembled. Can also be fitted with adjusting blocks to increase height.
Made in the USA.
Please contact us to inquire about custom colors.
25" H, bench top 14" D x 49-1/2" L, 45" between feet.
Please select your keyboard(s). They are in eaches without key cheeks (though some of the pictures show them in stacks for display purposes).
You can have them all the same or mix and match keyboards of the same type. For instance, you can have one white with pistons and 2 white pistonless keyboards.
You can even have 3 Cherry keyboards and 1 Ebony.
Unfortunately you cannot mix white and wood-core keyboards.
Description
These are the same key-beds as our very popular NEW CMK-3 Tracker Touch keyboards now with Ebony Natu...
Price: USD1,175.00
Quantity:
Ebony Wood-Core Pistonless MIDI Keyboards
Description
These are the same key-beds as our very popular NEW CMK-3 Tracker Touch keyboards now with Ebony Natural with Cherry Sharp wood-core keys.
They are a quick way to add MIDI capability to an old console as they mount in cheeks like normal keyboards. You can combine this keyboard with a 15, 20, or 24 Piston Rail (lighted or non-lighted). Make sure you select the piston rails made for wood keyboards.
(Note: Pricing listed is per manual. Pictures demonstrate suggested usage.)
Features
Quality, portable 61-note keyboard
Two analog inputs for volume and crescendo.
One 1/4" analog input for a sustain, sostenuto, or damper pedal - NEW
Optional velocity sensitivity.
Also sends "Note off" velocity - NEW
Built in USB MIDI interface - NEW
Single keyboard can be powered by the USB port. Multiple keyboards need daisy chained power from included power supply.
MIDI-input merge function so that multiple CMK keyboards and MIDI devices can be connected together.
"Tracker Touch" feel to the keys - independent reviews of our "Tracker Touch" in our Articles section
Description
Cherry naturals with ebony sharps versions of our very popular CMK-3 Tracker Touch keyboards now with wood-...
Price: USD1,050.00
Quantity:
Cherry Wood-Core Pistonless MIDI Keyboards
Description
Cherry naturals with ebony sharps versions of our very popular CMK-3 Tracker Touch keyboards now with wood-core keys. You can combine this keyboard with a 15, 20, or 24 Piston Rail (lighted or non-lighted). Make sure you select the piston rails made for wood keyboards.
They are a quick way to add MIDI capability to an old console as they mount in cheeks like normal keyboards.
(Note: Pricing listed is per manual. Pictures demonstrate suggested usage.)
Features
Quality, portable 61-note keyboard
Two analog inputs for volume and crescendo.
One 1/4" analog input for a sustain, sostenuto, or damper pedal - NEW
Optional velocity sensitivity.
Also sends "Note off" velocity - NEW
Built in USB MIDI interface - NEW
Single keyboard can be powered by the USB port. Multiple keyboards need daisy chained power from included power supply.
MIDI-input merge function so that multiple CMK keyboards and MIDI devices can be connected together.
"Tracker Touch" feel to the keys - independent reviews of our "Tracker Touch" in our Articles section
Description
These are the same keyboards as our very popular CMK-3 Tracker Touch, MIDI organ keyboard. They are a ...
Price: USD575.00
Quantity:
White Pro Pistonless MIDI Keyboards
Description
These are the same keyboards as our very popular CMK-3 Tracker Touch, MIDI organ keyboard. They are a great, economical way to add an extra manual to your stack You can combine this keyboard with a 15, 20, or 24 Piston Rail (lighted or non-lighted). Make sure you select the piston rails made for plastic keyboards.
They are also a quick way to add MIDI capability to an old console as they mount in cheeks like normal keyboards.
(Note: Pricing listed is per manual. Pictures demonstrate suggested usage.)
Features
Quality, portable 61-note keyboard
Two analog inputs for volume and crescendo.
One 1/4" analog input for a sustain, sostenuto, or damper pedal - NEW
Optional velocity sensitivity.
Also sends "Note off" velocity - NEW
Built in USB MIDI interface - NEW
Single keyboard can be powered by the USB port. Multiple keyboards need daisy chained power from included power supply.
MIDI-input merge function so that multiple CMK keyboards and MIDI devices can be connected together.
"Tracker Touch" feel to the keys - independent reviews of our "Tracker Touch" in our Articles section
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK...
Price: USD1,150.00
3-Manual Red Walnut Key Cheeks with Music Rest
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK2 and CMK3 keyboard types.
They are a red walnut finish (to match our pedalboards and benches) and have blind fasteners for a seamless assembly. All is flat packable and can be assembled in minutes.
The included music rack is movable both horizontally and vertically and is also removeable.
The modular design of the key cheeks allows you to add another layer should you choose to add another manual in the future.
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK...
Price: USD850.00
2-Manual Red Walnut Key Cheeks with Music Rest
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK2 and CMK3 keyboard types.
They are a red walnut finish (to match our pedalboards and benches) and have blind fasteners for a seamless assembly. All is flat packable and can be assembled in minutes.
The included music rack is movable both horizontally and vertically and is also removeable.
The modular design of the key cheeks allows you to add another layer should you choose to add another manual in the future.
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK...
Price: USD650.00
1-Manual Red Walnut Key Cheeks with Music Rest
CURRENTLY PRE-ORDER ONLY
These key cheeks are designed to fit a three-stack of all of Classic's current pistonless, CMK2 and CMK3 keyboard types.
They are a red walnut finish (to match our pedalboards and benches) and have blind fasteners for a seemless assembly. All is flat packable and can be assembled in minutes.
The included music rack is movable both horizontally and vertically and is also removeable.
The modular design of the key cheeks allows you to add another layer should you choose to add another manual in the future.
This minimalist console table is designed as an elegant, low cost, console solution for Hauptwerk users who would like t...
Price: USD2,995.00
Console Table (Red Walnut)
This minimalist console table is designed as an elegant, low cost, console solution for Hauptwerk users who would like to have a 2, 3 or 4-manual practice instrument for their home, school or rehearsal area.
Features sloping and angled bolsters for up to 16 toe studs.
A removable back comes standard as part of this package. It provides added security and elegance if the back is to be visible.
Monitors or touchscreens sit on either side of the key-cheeks to give you virtual stop jams. You also have the option of using a through-hole mounting monitor mount.
The console is designed to accommodate the Peerless LCV-100 monitor mounts. However, the hole placement should be compatible with most mounts with a similar post.
There is a reservoir in behind the console to accomodate and access a tower as big as a Mac Pro. Also included is a two-rackspace shelf, with cable channels, to accomodate your other audio gear so that few, if any, wires are visible from the front. The console has enough space for 3 MIDI Works swell shoes when they are mounted on a MIDI Works pedalboard.
Would you like to add toe studs to your system? Our console table can can hold 8 or 16 toe studs.
NOTE: Our toe studs normally are held up by our console table and the MIDI messages are connected to our pedalboard. If you would like to purchase toe studs for a custom project and do not require our console table or pedalboard, contact us first and find out how it can be done!
A computer is needed to be able to connect our equipment with Hauptwerk. It also acts as a work horse, processing and recognizing MIDI activity, Hauptwerk settings, etc.
If you would like to know more about selecting the right computer, we offer you a great article to read that we hope will help you out.
The U-DAC8 is a 8 channel asynchronous USB audio Digital to Analog interface (DAC). By combining the power of XMOS chips...
Price: USD295.00
MiniDSP-8 U-DAC8
The U-DAC8 is a 8 channel asynchronous USB audio Digital to Analog interface (DAC). By combining the power of XMOS chipset with AKM DAC, the U-DAC8 achieves great audio performance in a small form factor. From basic surround audio format (5.1/7.1) to the latest immersive audio standards(multiple U-DAC-8), miniDSP makes multichannel streaming easy and affordable.
With Plug & Play support for Mac OSx and WDM/ASIO compliant drivers for Windows platform, the interface supports a wide range of sample rate(44.1~192kHz). On the analog side, the U-DAC8 has 8 channel unbalanced RCA connectors with up to 2Vrms output drive. The sturdy black metallic enclosure with mounting brackets is a perfect fit for an equipment rack or tucked away next to your computer. Check out the latest from our application section.
VPOs are the software that brings the MIDI organ to life. It acts as the brain, containing configurations and sounds needed for our organs to work. We do not sell these software directly, however we have provided you with links below of some popular VPOs:
Lastly, you will need an audio system to play back the sounds coming from Hauptwerk. A VPO audio system is generally made out of an audio interface and speakers (depending on the speakers, you may need an external amp).
For our U.S. customers, we offer audio bundles in our U.S. Store: View Audio Bundles
If you would are planning to put together an audio system yourself, we highly recommend you reading the articles below:
If you have any questions and suggestions, please do not hesitate to contact us.
WHERE ART AND TECHNOLOGY MEET
Classic MIDIWorks is an online retail store that offers top of the line hardware/software for those aiming to put together a Virtual Pipe Organ If you are looking to putting together a system from scratch or adding MIDI to an existing organ, then you have come to the right place!
WHAT MAKES US DIFFERENT?
All our hardware is modular. This means that instead of simply offering x models with an x number of manuals, shoes, toe studs, etc... you can select what you'd like and we can help you put together the organ that YOU WANT. Our knowledgeable staff is happy to help you every step of the way from start to finish. We pride ourselves in great customer support and ensuring that you get to playing your Virtual Pipe Organ as fast as possible.
THE MODERN ORGANIST'S PRACTICE ORGAN
A MIDI Works system is both cost and space efficient, fitting in almost any space. Paired with good speakers and/or headphones, it is the ideal practice organ. Regardless if you are a professional or hobbyist organist, you can enjoy playing from the comfort of your own space whenever you want.
AN INNOVATIVE TOOL TO TEACH AND LEARN
The virtual pipe organ is an instructor's best friend. Students can have the freedom to play particular pieces on particular organs. In just a matter of seconds, students can be playing on a French organ one minute, then an English or German organ the next!