Current Store:  

 Other operating system and PC optimizations and diagnostics 

 

We recommend having as few other programs and background processes running at the same time as Hauptwerk as possible, since all 

running programs and processes will take processing resources away from Hauptwerk to some extent and can sometimes interrupt 

audio by accessing the Internet or hard-disks. There are many websites that cover optimizing particular operating systems for audio. 

Some things to try (in addition to those mentioned previously) if you have problems with audio glitches on Windows PCs: 

 

1. Make sure you're using the latest version of Hauptwerk. 

2. If you had previously disabled the Windows page file (which was recommended for Hauptwerk 2 and earlier versions) or had 

adjusted Windows virtual memory settings in any other way, please make sure the page file is re-enabled and set specifically 

back to its default of 'system managed size'. Having it disabled or set to an inappropriate size can cause stability problems, 

performance problems, or other severe problems with Hauptwerk, other applications, or Windows itself, especially if 4 GB or 

more of memory is installed. On Windows XP use Start | Settings | Control Panel | System, then click on the Performance | 

Settings button on the Advanced tab. Select Adjust for best performance, then click the Advanced tab. Leave Processor 

scheduling and Memory usage both set to favor Programs. Click Virtual memory: Change and select System managed size for 

the hard-disk you want Windows to use for its virtual memory, then click Set. Finally click OK on all of the windows and re- 

boot the computer if you changed any settings. 

3. See whether the problem occurs with just a very small sample set loaded, and when just a single pipe is sounding. For 

example, try the free Ott Orgel sample set, which can be downloaded from our website. If so, then the problem is probably not 

due to insufficient memory or an incorrect polyphony limit setting. 

4. Make sure that all current Windows and driver updates are installed. 

5. Make sure that you have the latest BIOS version installed for your motherboard. 

6. Make sure you have the latest manufacturer-supplied ASIO driver installed and selected in Hauptwerk for your audio interface 

(General settings | Audio outputs). 

7. Try audio buffer sizes of 1024, 512 and 256 in Hauptwerk on the General settings | Audio outputs screen. Note that some 

audio interface drivers ignore the buffer size that an application (such as Hauptwerk) requests, and instead always use the 

buffer size set in their ASIO control panel. Hence you might instead need to adjust the buffer size via their ASIO control panel, 

which can be accessed by clicking the Show device control panel button on the General settings | Audio outputs screen in 

Hauptwerk. You can determine which buffer size setting the driver is using by looking for the buffer size shown in the 

Hauptwerk log file (use Help | View recent error/activity log in Hauptwerk, scroll to the end, then look at the latest INF:5152 

line). 

8. Try running another 'pro audio' application that uses ASIO, apart from Hauptwerk, to determine whether the problem is 

specific to Hauptwerk. For example Native Instruments make a Hammond organ emulation called the B4, which uses ASIO in 

stand-alone mode (a demo version can be downloaded from their website). Make sure that you select the same ASIO driver 

that you are using for Hauptwerk, and try the same audio/ASIO buffer size. 

9. Disconnect any hardware devices that are not absolutely essential for Hauptwerk and the computer to function, to see if that 

eliminates the problem. For example, disconnect all USB cameras, printers, scanners, modems, touch-screens, external hard- 

drives and USB hubs. 

10.Try disabling your motherboard's onboard audio, either in the BIOS or in Windows Device Manager (in the Windows Control 

Panel). Motherboard audio devices sometimes conflict with professional audio interfaces/drivers. 

11.Make sure that all Windows sounds are disabled (Control Panel | Sounds ... | Sounds and set the sound scheme to 'No sounds'). 

12.Make sure that no other applications are running at the same time as Hauptwerk, especially applications that might try to 

produce any audio/sounds. In particular, check that nothing unnecessary is running in the Windows System Tray, such as 

media/MP3/video players or messaging applications. 

13.If possible, set Windows to use a device other than your main audio interface as its default device for playback and recording 

(Control Panel | Sounds ... | Audio) to try to prevent Windows or another application from trying to access the audio interface 

whilst Hauptwerk is streaming audio to it. 

14.Check that no hardware resources are shown as conflicting in Windows Device Manager (in the Windows Control Panel). 

15.Also check that no hardware resources, such as interrupts (IRQs), are being shared between your audio interface (or the 

firewire/IEEE 1394 controller, if the audio interface is a firewire unit) and any other key system hardware, such as the graphics 

card. You can check hardware resource assignments by selecting View | Resources by type in Windows Device Manager (in 

the Windows Control Panel). If your audio interface or firewire controller are sharing any hardware resources then try moving 

the audio interface or graphics card (or whichever other device is sharing the resource) to a different PCI/PCIe slot, or see if 

your motherboard's BIOS allows the resources to be reassigned manually. 

16.Try your audio interface with each possible connection (for example, in each possible PCI/PCIe slot, or attached to each 

possible firewire port, depending upon its connection type). 

17.Try temporarily disabling all network adapter devices, Bluetooth devices and wireless networking devices in Windows Device 

Manager (in the Windows Control Panel). Network/wireless devices/drivers are a common cause of audio performance 

problems. 

18.Keep any network leads and Internet connections disconnected whilst using the computer for audio. This prevents other 

Internet or 'auto updater' applications (such as Windows Update or virus scanner updaters) from updating whilst Hauptwerk is 

running, and potentially causing the network drivers to take processing time away from audio or from the audio interface's 

drivers. 

19.Disable Windows' disk indexing for all hard-drives (right-click on each drive icon, select Properties, then un-tick Allow 

Indexing Service ..., then select the option to apply to all sub-folders/files when prompted). 

20.Disable Windows Vista's scheduled hard-drive defragmentation (you will then instead need to defragment you hard-disk(s) 

manually periodically). To do so, right-click on each drive icon, select Properties, select the Tools tab, click Defragment Now

un-tick Run on a schedule ... and reboot. 

21.Try running the free DPCLCAT utility available from Thesyscon to see if a hardware device/driver on your PC is introducing 

an excessive latency that is prevent your audio interface from being able to stream low-latency audio reliably. On a well- 

performing PC the latency values would normally be in the 50 - 200 microsecond range. Any values in excess of 1000 

microseconds indicate a significant hardware/driver performance problem that is likely to cause audio glitches with 'pro audio' 

(low latency) audio applications such as Hauptwerk. If DPCLCAT shows a problem then you will need to identify the device 

that's causing the problem and probably either disable it (either in Windows Device Manager or in your motherboard's BIOS), 

or find a better-performing driver for it, or adjust its driver/BIOS settings. 

22.If your audio interface driver comes with audio/ASIO performance diagnostic utilities, then try using those in conjunction with 

their documentation to see if they can show where the problem is occurring. For example, the Echo Audiofire interfaces 

include a very useful 'ASIO Analyzer' utility which can quickly show whether there is a hardware/driver problem in the 

computer that's prevent the audio drivers from being able to work robustly for low-latency audio. 

23.If you're still having problems after trying all of the above suggestions, try sending a diagnostic file to your support provider 

(File | Create a diagnostic file ... in Hauptwerk) and detail the results of the preceding suggestions. 

On both Mac OS X and Windows, we also recommend disabling any power saving modes, such as hibernation / sleeping, screen 

savers or hard-disk sleeping. On notebook computers this needs to be done only for the times when the mains power supply is 

connected (when conserving power would be less important anyway), and you should always have the mains power supply connected 

when using Hauptwerk. If the computer hibernates / sleeps, or enters a power-saving mode whilst Hauptwerk is running, then you 

might experience extreme performance issues, especially if the operating system needs to re-read all memory back from disk when 

waking. 

No other operating system optimizations are usually needed on Apple Macs running OS X, since OS X has high-performance audio 

and MIDI support built-in and is usually already well-optimized for audio and MIDI.

 

If you are already a subscriber, simply fill in the email above again and we will send you a copy. 

 

CONTACTS

2800 John Street, Unit 4

Markham, Ontario

Canada, L3R 0E2

 

+1 (888) 812 9717

midiworks@organworks.com

NEWSLETTER

Subscribe